Making Fire from Water – The Safe Flame Project

,

Making fire from water is a seemingly insoluble contradiction – but in 2014 the project will hit the markets.

Instead of propane or acetylene, hydrogen is burnt, which in turn is produced from water in an electrolyzer. Also, the oxygen for the combustion arises from the chemical decomposition. The portable unit requires a standard 220 volt outlet and plenty of water. Therefore, no pressure cylinders for fuel gas and oxygen are required.

Safe-Flame

In addition, the flame burns much more smoothly and the hot spot is located outside of the burner head. The first tests, brazing aluminum, have been completed successfully.

The Safe Flame project is supported by the EU and actively supported by 11 partners, including EABS (The European Association for Brazing and Soldering).

Solvay supporting EABS technical awareness days for the joining of aluminium and copper piping in the huge global HVACR market. These will commence in January 2014 and run through out the year and will include ALL flames for brazing Al/Al, Al/Cu and Cu/Cu together with appropriate brazing alloys and fluxes.

For further information either contact Solvay or EABS.

Safe-Flame-Logo

A video and more information can be found on Euronews.com

euronews-video

0 Kommentare

Hinterlasse einen Kommentar

An der Diskussion beteiligen?
Hinterlasse uns deinen Kommentar!

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht.