Pastes and Paints
NOCOLOK Flux Paste
Physical Properties:
Appearance: white liquid
Flash Point: N/A
pH: neutral
Odor: slight
Chemical Composition:
NOCOLOK Flux: 20–42 %
Carrier: NMP-free water-carrier-system with binder and organic additives
CsAIF4: optional
Melting range: 565-572 °C
Addition of CsAIF4 will reduce melting point.
NOCOLOK Paint-F-Flux
Physical Properties:
Appearance: white
Flash Point: N/A
pH: neutral
Odor: slight
Chemical Composition:
NOCOLOK: 15–50%
Carrier: Balance
CsAIF4: optional
Li3AIF6: optional
Melting range: 565-572 °C
Addition of CsAIF4 will reduce melting point.
Addition of Li3AIF6 will reduce melting point.
Al-FLUX 0726 Flux Paste - Corrosive
Physical Properties:
Appearance: white
Flash Point: N/A
pH: 5-6
Odor: slight
Activity range: 400-560 °C
Chemical Composition:
The active component of Corrosive flux paste AL-FLUX 0726 contains a mixture of LiCl, NaCl, KCl, inorganic- and complex-fluorides. Organic carrier systems are used to prepare a wide range of pastes for flame brazing of aluminum materials.
NOCOLOK 7028-9028 – Metallized Flux Paste
Physical Properties:
Appearance: grey paste
Flash Point: N/A
Odor: slight
Chemical Composition:
NOCOLOK Flux 7028-9028 metallized flux pastes are a mixture of NOCOLOK Flux, aluminum filler metal powder and an organic carrier system. CsAIF4 optional.
NOCOLOK Precoating – water soluble
Physical Properties:
Appearance: viscous liquid
Boiling Point: approx. 100 °C
pH: neutral
Odor: characteristic
Application:
NOCOLOK Precoating can be used in mixture with NOCOLOK Flux or NOCOLOK Zn Flux and water to improve adhesion of the flux coating.