Flux/binder systems or component mixtures to reduce flux fall-off and minimize dust formation

NOCOLOK Binder (water-based)

Physical and Chemical Properties:

Appearance: viscous liquid
Color: colorless, glossy
Odor: product typical
Viscosity at 20 °C: 12 s 4 mm
Density at 20 °C: 1.02 g/cm3
pH: 8 – 9
Vapor pressure at 20°C: 18 hPa bibliographical ref.
Flash point: not applicable
Boiling point: 100 °C bibliographical ref.
Lower explosion limit: 1.3 vol. %
Higher explosion limit: 9.5 vol. %
Solubility in water: mixable Solvent
content organic: 2 – 6 %
Solid content: 14 – 19 %
Solid volume: 16 liter/100 kg

Classification

The product should not be allowed to enter drains or water courses.
Danger classification: n. a.
The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EG

Classified as non-hazardous according to the European regulation (EL) 1272/2208

Safety recommendations and additional information can be found in the Material Safety Data Sheet (MSDS).

NOCOLOK Flux plus Binder Mixture

Physical and Chemical Properties:

Potassium fluoroaluminates K_1–3AlF_4–6

Physical Chemical Properties:

Appearance: viscous suspension
Color: white, opaque
Odor: product typical
Viscosity at 21 °C: 0.08 Pa*s at shear rate 245^s-1 (RHEOLAB MC1; system: MP 31; d = 50 mm; 0 °; gap width 0.5 mm):0.06 Pa*s at shear rate 3000 ^s-1

Composition

NOCOLOK Flux: 35 % wt.
NOCOLOK Binder: 15 % wt.
NOCOLOK Thickener: 5 % wt.
Water: 45 % wt.

Classification

CAS No.: 60304-36-1 111-76-2
GHS Labelling: Signal Word: Danger
Hazard Symbols: GHS07, GHS08
Hazard Statements: H319, H332, H362, H372, H412
Precautionary Statements: P260, P 263, P273, P280, P305+P351+P338, P308+P313, P501

Classified as hazardous according to the European regulation (EC) 1272/2008

Safety recommendations and additional information can be found in the Material Safety Data Sheet (MSDS).

NOCOLOK Sil Flux efg plus
Binder Mixture

Physical and Chemical Properties:

Appearance: viscous suspension
Color: white, opaque
Odor: product typical
Viscosity at 21 °C: 0.05 Pa*s at shear rate 245 s^-1 (typical valule)
(RHEOLAB MC1; system: MP 31; d = 50 mm; 0°; gap width 0.5 mm): 0.04 Pa*s at shear rate 3000 s^-1 (typical value)

Composition

NOCOLOK Sil Flux efg: 35 % wt.
NOCOLOK Binder: 15 % wt.
NOCOLOK Thickener: 5 % wt.
Water: 45 % wt.

Classification

CAS No.: 60304-36-1 111-76-2
GHS Labelling: Signal Word: Danger
Hazard Symbols: GHS07, GHS08
Hazard Statements: H319, H332, H362, H372
Precautionary Statements: P260, P 263, P273, P280, P305+P351+P338, P308+P313, P501

Classified as hazardous according to the European regulation (EC) 1272/2008

Safety recommendations and additional information can be found in the Material Safety Data Sheet (MSDS).