• Home
• Applications
• Products
• Packaging
• Technical Center
  • Cleaning
  • Pre-fluxing using Binder-Based Spray Method
  • Temperature Determination in Furnace
  • Flame Brazing
  • CAB in Laboratory Glass Furnace
  • Metallographic Examination
  • CAB in Batch Type Furnace
  • Corrosion testing
  • Scanning Electron Microscopy
• Events
• Downloads
• Contact
• Company Info
• Imprint
• Data Privacy

Corrosion testing

Purpose

To check corrosion resistance and behaviour of real parts as well as mock ups and laboratory samples.

Procedure

Testing is done in a spray type chamber (approx. 1000x60x25 cm). Standard testing usually follows ASTM no G85 – SWAAT Test, however, other methods such as the Salt Spray Test are also possible.

You can buy and download the ASTM G85 - 09 Standard Practice for Modified Salt Spray (Fog) Testing on the ASTM website: ASTM-Website