Flame Brazing
Purpose
Testing the characteristics and properties of different material and flux combinations under flame brazing conditions.
Procedure
The components to be joined are first cleaned and then assembled using holding fixtures. Filler alloy is added in the form of brazing paste or brazing rings. Fluxing paste is applied manually by brush to the joint area.
After fluxing, the parts are heated with an open propane-butane flame. Operation of the flame is manual. Several different material combinations like Al-Al, Al-Cu, Al-Steel are possible.
For more information, please download the brochure:
Flamebrazing with NOCOLOK Flux
